CNC gearbox vz.58 designed for airsoft replicas made by Ares. This gearbox is manufactured from one solid block of aircraft aluminum (Dural) EN AW 7075 T651, which has higher strength (590MPa), than common construction steel (390MPa). Because of used material, our gearboxes have the best durability and resilience than common zinc-aluminum gearboxes. We are manufacturing these gearboxes on our precise CNC milling machines in our factory. Detail in bracket (8mm) means diameter for bushings/bearings.
Package includes: CNC Gearbox vz.58 (8mm) – QSC in chosen color, set of screws and QSC spring guide.
We made some useful improvements into our CNC gearboxes vz.58:
Spring holders have grooves, so the springs for tapped plate and trigger switch will not jump off.
Sockets for bushings/bearings have smaller diameter about -0,02mm (7,98mm), for non-overturning the bushings during installation. The socket edges are cutted down for better installation.
All threads are now shaped instead of cutted for better strength.
Both of the gearbox parts are centered by milled grooves and edges.
For better durability, we added more material around cylinder head part of the gearbox, this was the most critical part and we added 100% more material where is huge radius.
Outer edges are now cutted off.
RetroArms gearbox has quick spring change system QSC, where you can put out whole spring guide with hex key and change the spring without need of opening the gearbox. In this solution, you need to secure spring guide with screw, commonly with AR 15 (M4) replicas, it is by stock screw. In situations where you have folding stocks or no stock at all, you have to secure the spring guide with QSC screw. Otherwise there could be situation, where the spring guide will stuck with the spring. This is because the spring guide is not fixed in the gearbox but has will for easy removing with hex key.
CNC gearbox vz.58 has protective anodizing, even when it is problematic to anodize aluminum EN AW 7075 T651 (Dural), because of its high strength and hardness. If we did not anodize products from this material, there is huge risk of corrosion (huge gray spots with rotten look).
CNC gearbox can be installed only in airsoft replicas vz.58 made by Ares. That means even the inner parts. Do not use rude force during installation. Use only 1Nm tightening moment on screws, otherwise the screws will overturn in heads. There is no need of tightening screws with rude force, if you want to be sure that screws will sit perfectly, use thread glue or thread color.
You can use in our CNC gearbox any spring of your choice, but be aware that stronger springs will result in lower durability.
!! do not use MAXX cylinder head !!
Installation of the inner parts and gearbox requires professional knowledge, experience and skills. There are a lot of airsoft manufacturers on the market and every one of them create their own sizes, there are no standards like engineering ISO in airsoft. This is the main problem with a lot of inner and outer parts from different manufacturers which can be same product, but with different dimensions. We recommend using only parts from manufacturers with Tokyo Marui compatible parts, where should not be a problem with compatibility with our CNC gearbox.
Для покупки нажмите кнопку "В КОРЗИНУ". Кнопка поменяет надпись на "В КОРЗИНЕ". Если нажмёте на неё ещё раз, попадёте на страницу оформления заказа.
После перехода в корзину Вы видите список ваших товаров, можете изменить количество или добавить новые товары. Если всё хорошо - нажимайте "ПЕРЕЙТИ К ОФОРМЛЕНИЮ"
Для оформления заказа заполняете полностью форму по последовательным этапам: адрес, способ доставки, оплаты, данные о себе. Советуем в комментарии к заказу написать информацию, которая поможет курьеру вас найти. Нажмите кнопку «Оформить заказ».
После нажатия кнопки вы видите кнопку "ОПЛАТИТЬ" - нажимаете, оплачиваете, мы получаем заявку и приступаем к сборке.
СДЕК или БОКСБЕРРИ на выбор
- Мы отправляем товары с 9.00 до 17.00 с понедельника по пятницу. После оплаты заказа мы начинаем его собирать, а вы получаете на почту трек-номер по которому можно будет отследить где ваш заказ.
- Когда заказ поступит на точку выдачи, на ваш телефон или e-mail придет уникальный код. Доставка уже оплачена, вам нужно будет только забрать Вашу покупку.
Бонусы за заказ
За каждый заказ вы получаете на счёт сайта 1% от стоимости товаров. Полученными бонусами можно оплатить следующие заказы.
- Срок действия бонусов 1 год
- Оплатить бонусами можно до 25% от суммы заказа
- 1 бонус = 1 рублю
- бонусы начисляются за любые оплаты, даже если купили в кредит
- Количество бонусов можно проверить в личном кабинете